Before you begin installation, all of the below prerequisite steps are required to be completed.
Verify the bridge, designated to support the clock or repeater install area, has established a network connection to OneVue and a NTP Server. If a bridge is set to no network mode due to a network is not available, this step is not required.
Where the repeater is mounted impacts its use and operation. The guidelines below should be taken into consideration to ensure the installation location provides optimal performance.
If a Site Survey was completed, install devices at each designated location. Start by installing devices that are located closest to the bridge and then work outward. A device should always be first powered on at its designated install location.