From a profile of you can manage its settings. Settings include its name, assigned Business Unit and Location, color and brightness level of its LED digits, its 2-line display, and its NTP Server and time zone.
Go to Devices > Message Boards.
Select the Name link of the Message Board. Its profile settings are displayed.
Settings
Setting |
Definition |
---|---|
Name |
commonly identifies the installation location. It's recommended to develop a standard naming convention to allow you to easily locate a Message Board if maintenance should be required. Allows up to a maximum of 50 characters. |
Label |
to a maximum of 20 characters. |
Description |
Identifies the model of the device. |
Gateway ID |
Unique 12-character ID (MAC address) of the gateway component of the Message Board. |
Business Unit |
If your account is set up to manage user access by Business Unit, you may need to assign a Message Board to its applicable Business Unit. By default, set to your account Business Unit. |
Location (optional) |
if your account is set up to manage user access by location, assign the Message Board to its applicable location. |
Advanced settings. Below settings are only viewable when Show Advanced Options is selected. | |
Color |
Sets the LED digit color of the 2-lines displayed. |
Brightness Level |
Sets the brightness level of the LED digits. Options include: 25%, 50% (default), 75% and 100%. |
Display Options |
Show - sets what is displayed on line 1 and line 2 of the Message Board. Options include: Time-Date setting : The first line displays the current time (hh:mm:ss format) and the second line displays the current date (mm/dd/yy format). Time-Message setting: The first line displays the current time (hh:mm:ss format) and the second line displays a unique message. The message allows up to a maximum of 64 characters, including spaces. |
Enable Time Zone / NTP Change |
Enables Time Zone or NTP Server setting changes to be downloaded to Message Board. When the checkbox is selected and a setting change is saved, the change is scheduled to be downloaded to the Message Board during next connection to the facility's Ethernet network. When a change is downloaded to the Message Board, it continuously reboots for approximately 6 minutes. Once downloaded, deselect the checkbox and select Save to stop the device from rebooting. 12 minutes after a setting change is saved, the change expires; under the assumption the change was downloaded to the Message Board. |
Time Zone |
Set to a specific time zone or set to Default. Default indicates either set to the account's time zone or its assigned location's time zone. The Default Time Zone is displayed in (parentheses). If assigned to a location, the Default time zone is the location's time zone. |
NTP Server 1 & 2 |
NTP Server IP Address(es) or set to Default. Default indicates either set to the account's NTP Servers or its assigned location's NTP Servers. Use of external NTP Servers requires that port 123 is open to UDP traffic to allow a Message Board to connect to an external server. Primex recommends using the facility's designated NTP Servers, and set two valid NTP Servers to ensure a reasonable level of accuracy can be maintained. Use of a Domain name for the NTP Server, such as time.nist.gov, requires Domain Name resolution (DNS). |