State History is all state changes of the Bell Controller Relay, providing a consolidated view of state-change events for a specified period of time. This information is helpful during troubleshooting to analyze its past state-change events.
Go to Devices > Bell Controller Relays.
From the list, select the 9-character link of the relay to view. The last digit indicates if it is relay 1 or 2.
From the Relay State History, select View.
Set the date range to include. If there is no state changes for the dates selected, nothing is displayed.
All state changes occurred for the date range selected is displayed.
Check In/Date Time
Date and time the device checked-in to OneVue and reported the State change or the date/time the system set the State.
State of the device at the check in/date time.
Unique 12-character ID (MAC Address) of the Bell Controller device. Selecting the link opens the Bell Controller's gateway profile.
Zone assigned to the relay.
A Bell Controller has two relays that are wired to a public address (PA) or bell system. A Zone, which contains bell schedules, is assigned to the relay of a Bell Controller. Zone schedules are downloaded to the Bell Controller device, which allows its relays to trigger school bells to ring at the periods set in the relay's assigned Zone.
If the state change was completed by a user, the reason entered by the user is displayed.
If the state change was completed by a user, the user's name is displayed.