A dual-sided analog clock consists of two analog clocks and a dual clock kit. Using the kit you combine two clocks to create a dual-sided clock, which can be either ceiling or wall-mounted.
(1) Dual mount bracket
(1) Mounting plate
Screws and anchors are supplied with the single clock packaging.
Measure and drill holes into the wall or ceiling to align with the mounting plate hole spacing measurements.
Attach the mounting plate to the wall or ceiling using the provided anchors and screws.
Slide the dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the clock bracket may be required to seat the clock bracket assembly fully into place.
Insert batteries into each clock.
Place each clock in the housing with the 10/11 and 4/5 numerals over the brass posts.
Place your hands at the 10/11 and 4/5 positions and turn the clock clockwise to lock into place. Repeat this step for each of the two clocks.
Examine the mounting plate to ensure the bracket is fully engaged. The small hole in top side of the mounting plate should be visible and fully exposed. To increase the security of the clock assembly, a common screw may be inserted into the hole and screwed into the wall.