A dual-sided clock consists of two single clocks and a Dual Mount Kit. The kit contains a flange (piece that mounts to ceiling or wall), a bracket (piece that bolts to flange and to which two clocks are mounted), and the hardware necessary to complete the installation. Using the kit, you combine the two single-sided digital clocks to create a dual clock.
The two clocks function independently of each other, requiring each clock’s settings to be configured separately.
Flange: mounts to ceiling or wall
Bracket: bolts to flange and to which two clocks are mounted
Hardware necessary to complete the installation
Required components not supplied: junction box
For mounting dimensions, refer to Dual-sided mounting dimensions (Digital Clock/Timer).
On the wall or ceiling, measure and drill holes with the correct spacing to mount the flange over the junction box.
Attach the flange (A) to the wall or ceiling using the supplied toggle anchors and longer machine screws.
If wall mounting to location outside of the junction box, break off or cut openings in flange to route power cords.
Attach the bracket (B) to the flange (A) using the supplied shorter machine screws, nuts, and washers.
Apply power to clocks (C); use cord retaining clips to dress wires.
Align the clock to the bracket hooks and hinges (D) and snap into place.
Mounting illustration (wall and ceiling)