When installing a new system or adding new devices, learn about what should be considered to ensure a seamless installation.
For a system with Repeater Transmitters always install and configure the main Transmitter first and then install the Repeater Transmitter(s).
When a clock is powered on, it automatically initializes its set up and searches for a signal to receive its time.
The scheduled search frequency varies by clock model as defined below.
When a clock has not received a valid signal/time update for three consecutive days, it displays a visual signal loss indicator; an analog clock's second hand advances and pauses continuously (stepping) and a digital clock/timer's colons flash. A clock may display the correct time, but it's not synchronized and its time may drift.
GPS Receiver needs to “see” three satellites in the sky above before it will send a time signal to the Transmitter. If the GPS Receiver has a 360° view of the sky, the process may take only 15 minutes or as many as several hours. The length of time is dependent on the location (if the unit does not have a full view of the sky, due to wall or window installations, building “shadows”, etc.) weather conditions (clear or overcast) time of day, and other similar environmental factors.
If the Transmitter is receiving its time source from the optional NTP configuration, it sends requests to the NTP server at defined intervals.
The Transmitter does not transmit time data until it has received valid time information from a time source. Once the Transmitter receives a time signal, the Transmitter sets its internal clock to the received time. The Transmitter then begins to transmit its internal time once every second. The Transmitter continually monitors it time source connection and updates its internal clock with the time data it receives.