If you're just learning about the OneVue Device Configurator (ODC) app or simply need a few more details to get started, this topic provides an overview of how it works and other important information.
The ODC app configures OneVue Sync Transmitters and Notify InfoBoards locally at the device. When installing or adding a new Transmitter or InfoBoard, they must be configured with the ODC app to allow them to operate onsite.
During configuration, the device's primary settings are configured and stored locally in the device.
When configured for use with OneVue, the device is added to OneVue to allow remote monitoring and management.
The app is also required to update Notify InfoBoard settings with the OneVue Notify non-subscription solution.
The ODC app is different than the Primex OneVue Wired Device Configurator (OWDC) app, which is used to configure OneVue sensors, bridges, bell controllers, and PoE digital clocks.
The ODC app and Sync Transmitters and Notify InfoBoards communicate over a Bluetooth pairing connection. During this connection, settings are downloaded to the device. Devices are equipped with a wireless Bluetooth radio component that is activated locally at the device to allow its pairing with ODC app.
Once you download the app, the app guides you through the entire process. A device is configured through the Bluetooth pairing connection between your mobile device and the Primex device. It's an easy process that provides onsite configuration.