As part of your emergency response plan, how a OneVue Notify Critical Notification event is activated is dependent on the hardwired integration to the main Transmitter's contact closure terminal block. The input source is either from the five-button Critical Notification Panel or integration with a third-party system. For a third-party system, an event is automatically activated from a contact closure event received by the main Transmitter.
Each InfoBoard stores a critical notification profile that contains the five critical notification event types. By default, these events are preset by Primex.
Primex default presets are shown below.
Event 1: Lockdown. Color: Red, Mode: Flashing, Scroll: 0 (none)
Event 2: Evacuate. Color: Blue, Mode: Flashing, Scroll: 0 (none)
Event 3: Weather. Color: Amber, Mode: Flashing, Scroll: 2
Event 4: Lockout. Color: White, Mode: Constant, Scroll: 2
Event 5: All Clear. Color: Green, Mode: Constant, Display Duration: 5 minutes
A customization to the preset critical notification events may be required to meet the requirements detailed in your emergency response plan. Any customization requires assistance from Primex Technical Support and must be planned and tested.
Activating a critical notification displays the event on all InfoBoards, providing a visual display to notify building occupants. An activated event continues to be displayed until the All Clear Event is activated. When the All Clear notification is activated, the InfoBoards display All Clear for a specified number of minutes (by default for 5 minutes) and then return to displaying synchronized time and general messaging.
Press and release the Event button to be activated.
Activated event is automatically broadcasted from the main Transmitter and displayed on all InfoBoards.
For a system with a Repeater Transmitter, an activated event is received from the main Transmitter by the Repeater Transmitter and re-broadcasted to and received by the InfoBoards within its range.
All InfoBoards continue to display the activated event until the All Clear event is activated.
The purpose of the All Clear event is to notify building occupants that the critical event has ended.
From the five-button panel, press and release the All Clear button.
All Clear is displayed for the number of seconds set in its Display Duration setting. Once the event ends, all InfoBoards return to displaying synchronized time.