Report provides the daily reading summary and the event history of Monitored Assets. The daily reading report data includes the calculated average, minimum and maximum readings of all readings for each day, the count of readings per day, and a summary for the report time period. The event history includes alert acknowledgments and comments, logged alert resolutions, and state-change comments.
The Report Profile that generates the report can be configured to include or exclude Monitored Assets in a Normal, Warning, or Alarm state. By default, all states are included.
The following sections describe what's included in the report and an example of the report.
Monitored Asset detail
The report is sectioned by each Monitored Asset and includes by each assigned sensor a Daily Readings Summary and Event History.
State, High and Low Threshold, Logging Interval, and Check-in Interval setting data is the value of the settings at the time the report was generated (Run Date).
Type of sensor. Represents the condition being monitored.
State of the sensor at the time the report was generated (Run Date).
Sensor's 12-character MAC address.
High Threshold and Low Threshold
Sensor's configured Normal Condition.
The Logging Interval is how frequent a sensor logs a reading and stores it into its internal memory. All logged readings are then sent to OneVue at the frequency set the sensor's Check-in Interval frequency.
The Check-in Interval is the frequency a sensor connects to the facility's network to send its logged readings to OneVue. Also during each check-in, pending setting updates are downloaded to the sensor.
Daily Readings Summary (Every 24 Hours) detail
Provides a reading summary for each day.
For this section, the Report Profile that generates the report can be configured to include or exclude the fields (data) below. By default, all fields are included.
Reading summary date. Date that all readings were logged that are included in the 24 hour summary.
AM Time / AM Reading
Time of and first reading logged after 12:00 AM.
PM Time / PM Reading
Time of and first reading logged after 12:00 PM.
Calculated value of the sum of all logged readings divided by the total sample points (logged readings).
Lowest logged reading of the day.
Highest logged reading of the day.
Total count of logged readings for the day.
Summary of the report time period including the following data.
Average of Average: calculated average of the average (sum of all logged readings divided by the total logged readings).
Minimum: lowest minimum reading for the time period.
Maximum: highest maximum reading for the time period.
No. Readings: total readings logged for the time period.
Event History detail
Details all of the Monitored Asset events for the report time period. Events include state-changes, state-change comments (User Comment), alert acknowledgments and comments (Acknowledge), and logged alert resolutions (Resolution).
Date and time the event occurred.
State the Monitored Asset changed to during the event.
Monitored Asset's assigned sensor 12 character MAC address.
Type of sensor. Commonly represents the condition being monitored.
Name of Monitored Asset.
Identifies the type of event and the cause of the event.
Identifies the user that logged/added the Comment details.
Comment Date Time
Date and Time the user logged the comment.
Identifies the type of comment added to the stage-change event, which may be either of the below.
Acknowledgement: user acknowledged an alert.
Alert Resolution: user logged a resolution.
State History Comment: user logged a comment to the Alert Resolution's State History.
User logged information for the comment type.