Complete the instructions below to mount a Levo Digital Clock/Timer directly to the surface of a wall; either by a keyhole or tilt bracket mounting method.
Note
Most building codes prohibit the use of hardwired power connections for devices that can be removed without tools. Clock/timers mounted directly to a wall must have standard power plugs.
-
Mount the clock/timer directly to a wall surface (keyhole mount) with the two #10 screws and anchors (supplied).
(A) Optional 4" x 4" junction box (not supplied)
(B) Keyhole mount spacing. Refer to Dimension D Tilt bracket and surface mounting dimensions (72MHz Digital Clock/Timer) .
(C) Leave 1/8 in. (0 .3175 cm) between the wall and screw or nail head.
(D) Wire dressing exit (top and bottom)
Apply power to the clock.
-
Mount the tilt bracket directly to the wall with the #10 screws and anchors (supplied) and secure clock to tilt bracket.
(A) optional 4" x 4" junction box
(B) 4 #10 screws and anchors. Refer to Dimension G/H Tilt bracket and surface mounting dimensions (72MHz Digital Clock/Timer) .
(C) Position top of device on the top two brackets posts and slide down and snap to bottom bracket (D).
(E) Wire dressing exit (top and bottom)
Apply power to the clock.