From the Event Scheduler Pro software you can easily configure and maintain the schedules of a Programmable Timer. Schedules are stored in the Transmitter’s memory and can be easily changed from the software.
A Programmable Timer counts down in minutes and seconds at a predefined schedule of timed events from 1 minute to 99 minutes 59 seconds. When not in a timer mode, the timer displays its synchronized time.
A timer begins counting down at each preset time on a schedule. When each countdown function is complete, the timer automatically displays its synchronized time. The countdown schedule and events are configured and managed using the Primex Event Scheduler Pro software. Schedules are then downloaded to the system Transmitter.
From the Event Scheduler Pro software you can easily configure and maintain the schedules for your Programmable Timers. Once a schedule is created, it's required to be downloaded to the Transmitter. A schedule can be set to download the schedules daily to the Transmitter or you can manually downloaded the schedules to the Transmitter from your computer.
The Event Scheduler Pro accommodates up to 25 different schedules. Each schedule can be customized to your needs. A schedule can support up to 96 single events.
Single, repeating daily schedule: a single, repeating daily schedule sets the same schedule of events for all days of the week. Each day, the same schedule will run on the selected days of the week. A single, repeating schedule may be programmed with up to 96 events.
Weekly, repeating schedule: a unique schedule of events for each day of the week. For this schedule, a single schedule is created for each day of the week and each week the same weekly schedule will run. The schedules automatically run in sequence for seven days; the sequence then repeats for each subsequent week. Up to seven unique schedules can be programmed, one for each day of the week. To create a weekly, repeating schedule, the Daily Download Capability setting is required to be enabled for each schedule.
Date specific schedule: a schedule that only runs on a specific date. After the date specific schedule has ran, the program returns to its previously programmed schedules. To create a date specific event, the schedule’s Daily Download Capability setting is required to be enabled.
Multiple applications: if your facility uses multiple zones, each schedule can be configured as a single zone. To use multiple zones, one Wireless Tone Generator is required for each zone. The Wireless Tone Generator switch ID is set to the schedule's Schedule ID.
Programmable event: an event is a scheduled time a timer will count down in minutes and seconds from 1 minutes to 99 minutes 59 seconds and when the timer stops the count down event. A timer's schedule is required to be set to Scheduler ID 24 and the event type ON indefinitely tells the timer when to start the count down event and the OFF indefinitely event tells the timer when to stop the count down event.
Schedule ID Coordinator: the schedule's Schedule ID Coordinator settings is required to be set to 24 to schedule a timer event. An ON indefinitely event is tells the timer when to start the count down and the OFF indefinitely event tells the timer when to end the count down. Once the timer receives the ON indefinitely event, it searches for the next OFF indefinitely event. Upon finding both the ON and OFF indefinitely events, the timer calculates the time between the two events and counts down the difference between these two events.
Daily download capability: you can set your schedules to be automatically downloaded daily to the Transmitter. To use the daily download capability, it's required to maintain a direct connection between the computer that has the schedules and the Transmitter and the Event Scheduler Pro software is required to be open on the computer at all times. If the computer is required to be shut down at night, set the automatic download time to occur just after the last scheduled event, but before the computer is to be turned off.
Manual download: if a schedule does not have the Daily Download Capability setting enabled, each time a new schedule is created or an existing schedule is edited, the updated schedule is required to be downloaded to the Transmitter.