Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks.
When identifying the install location of a Bluetooth device, the following guidelines should be followed to ensure a device as adequate Bluetooth wireless signal strength.
You can also measure the Bluetooth signal strength at an installation location to determine if the location has adequate Bluetooth signal strength.
The Personal Series LCD Clock has an easel stand located on the back of the clock.
-
To place the clock on a table or desk, simply unfold both sides of the easel stand.
Verify power is applied and displaying time.
Depending on your security needs, you can choose among the two mounting options.
Clock-lock wall mount
The clock-lock feature is a specially designed hanger at the top center of the clock. The clock-lock is designed to prevent accidents if the clock is bumped and it may reduce theft by requiring a particular combination of moves to remove the clock.
Use the screw and anchor provided with the clock for installation. If you choose not to use the provided screw and anchor, you can substitute a #4 screw. The screw must protrude from the wall 1 in. (0.25 cm).
Verify clock is level and mount is secure.
Standard wall mount
A standard mount avoids the clock-lock feature altogether. The clock can be removed like a standard clock.
Use a finishing nail with no head angled at 45 degrees into the wall.
Verify clock is level and mount is secure.