The LCD display provides a visual reporting of its sampled reading and current operating status.
Segment |
Description |
---|---|
Pressure |
The last sampled reading in either inH2O or Pa. A sample reading is taken every 5 seconds. The unit (inH2O or Pa) is configured within the sensor profile in your OneVue account. A Primex sensor continuously samples and monitors its sampled readings. If its sampled readings are out of range for 60 consecutive seconds, the sensor device automatically sends the out of range reading to OneVue. |
OPEN Door Switch Monitoring enabled |
Door switch is in the Open status. |
CLOS Door Switch Monitoring enabled |
Door switch is in the Closed status. |
No Signal |
|
Signal Ok |
Indicates its last check-in to OneVue was successful. |
LOW -Battery Level |
|
Lbat |
|
Up |
|
Con |
|
H \ / F (HwF) |
Indicates an internal hardware failure. This is due to the main processor cannot communicate with the internal sensing element. Contact Primex Technical Support for assistance. Readings are not displayed, sampled, logged, or transmitted to OneVue during this state. |