Articles in this section

Specifications: XR Repeater Transmitter and Receiver Switch

  • Updated
Follow

A Repeater Transmitter is an optional unit to supplement and extend signal coverage. An XR Repeater Transmitter includes a Receiver Switch that receives a time signal from the system's main Transmitter.

Parameter

Specification

Operating Frequency Range

72MHz

Channels

49 channels available (pre-programmed prior to shipping)

Dimensions

17 in. L x 12 in. W x 1.7 in. D (43.2 cm x 30.5 cm 4.32 cm)

Maximum Transmission

1 Watt (at Transmitter)

Radio Technology

Narrowband FM

Weight

9 lbs

Settings

Time Zone: LAN/Local, 30 min offset, serial/USB/Ethernet connectivity

Transmitter with External Antenna: preset by factory

Daylight Saving Time

Bypass switch

Display

Liquid Crystal Display (LCD)

Power Supply

Input: 120 VAC, 50/60 Hz, 0.6 Amp

Output: 9 VDC, 2.78 Amp

6 ft (1.82 m) cord

Operating Range

32° to 122° F (0° to 50° C), non-condensing environment

Note

Canadian Notice: 5 or 30 Watt Transmitter with an external antenna: The manufacturer rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

Receiver Switch specifications

Component

Specification

Cable

5 ft (1.52 m) RS232 cable connects Receiver Switch to the Repeater (Satellite) Transmitter

Dimensions

5.75 inches (14.6 cm) L x 4.25 inches (10.8 cm) H x 1.25" (3.16 cm) D

Antenna

12.5 in. (31.7 cm) L

Weight

0.75 lb (.34 kg)

Power Supply

Input: 120 VAC, 50/60 Hz, 0.4 Amp

Output: 9 VDC, 0.25 Amp, 6 ft (1.83 m) cord

Operating Range

-32° to 58° F (-36° to 70° C)

Related articles