Articles in this section

Specifications: Sync PoE Analog Clock

  • Updated
Follow

Power over Ethernet (PoE) Analog Cocks receive both power and data from a PoE enabled network. Optionally, power and data can be supplied with use of a Primex AC power adapter (optional accessory) and an Ethernet network.

Power over Ethernet

Compliant with IEEE 802.3af standard and compatible with 802.3at standard

Power

Input power: 48V, 6.25 Watts Max

Optional AC power adapter: 5V DC USB Mini B (5 pin) connector interface, 5 ft (1.5 m) cable

Network Communication Protocols

  • IP Addressing: Dynamic Hosting Configuration Protocol (DHCP); may also be configured with static IPv4 address.

  • Network Communication Protocol: Hypertext Transfer Protocol Secure (HTTPS)/TLS

  • Data Packet Size: typically less than 5 kilobytes (kB)

Operation

  • Automatically adjusts for Daylight Saving Time (DST)

  • Automatically performs a daily midnight hand verification check. When check fails for three (3) consecutive days, the clock enters a hand position failure status.

  • If power is interrupted, the clock stops until power resumes. Upon resumption of power, the clock self-corrects to the current time.

Environment

Operating Temperature Range: 32° to 95° F (0° to 35° C); indoor use only

Storage Temperature Range: -4° to 158° F (-20° to 70° C)

Certifications

FCC, CE, and IC compliant

Warranty

1 Year Limited Warranty

Related articles