Component |
Specification |
---|---|
Cable |
5 ft. (1.52 m) RS232 cable connects Receiver Switch to the Repeater (Satellite) Transmitter |
Dimensions |
5.75 in. (14.6 cm) L x 4.25 in. (10.8 cm) H x 1.25 in. (3.16 cm) D |
Antenna |
12.5 in. (31.7 cm) L |
Weight |
0.75 lb (.34 kg) |
Power Supply |
Input: 120 VAC, 50/60 Hz, 0.4 Amp Output: 9 VDC, 0.25 Amp, 6 ft. (1.83 m) cord |
Operating Range |
-32° to 58° F (-36° to 70° C) |
The Receiver Switch has an internal dip switch panel that sets the configuration for the time/date display, automatic Daylight Saving Time, and automatic channel scanning.
Switch |
Sets the... |
ON Position |
OFF Position |
---|---|---|---|
2 |
Time/Date |
Displays only the time. |
Displays current time for 8 seconds and the date for 2 seconds. |
3 |
12/24 Hour |
Displays the time in 24 hour format. |
Displays the time in 12 hour format. |
4 |
RF Channel Scan |
Enable the scan and look for a suitable channel. |
Disable the scan and only look on the selected channel for time/date/event info. |
5 |
Daylight Saving Time (DST) |
DST is disabled |
DST is enabled. |
6, 7, 8 |
Does not apply to the use of this unit. |