Model: Levo and Classic Digital Clocks and Timers
Elapsed Timer count-up or count-down does not trigger when initiated from Timer Switch Control.
There may be an issue with a cable connection, wiring issue, or a defective Timer Switch Control.
Inspect the Timer Switch Control for any damage or degradation.
-
Check the cable from the Elapsed Timer to the Timer Switch Control for any damage or degradation. Cable may need to be replaced.
Levo Series Elapsed Timer: cable is a RJ11 flat telephone cable (straight wire configuration).
Loosen the screws on the membrane Timer Switch Control. The screws may be over tightened, causing the issue.
Swap the Timer Switch Control with a known good switch to isolate the issue to the switch itself or a potential wiring issue between the Timer Switch Control and the Elapsed Timer.