Articles in this section

Specifications: Bluetooth™ Bridge

  • Updated
Follow

A Sync Bluetooth Bridge, equipped with Bluetooth® Low Energy (BLE), receives and sends data over the OneVue Sync Bluetooth mesh network and connects to an IP network to send data to and download settings from OneVue and obtain time from an NTP time source.

Parameter

Specification

Power

AC power: 5V DC USB Mini B (5 pin) connector interface, 5 feet (1.5 meter) cable, Input: 100-240 VAC, 50/60 Hz, 0.4A, Output: 5V DC, 1.0A max

Optional AC power extension cable: USB power cable 6.5 feet (2 meter), Mini B (5 pin) M and Mini B (5 pin) F connector

Battery backup power: 3.0v Primex Lithium/Iron Disulfide Battery Pack or two AA 1.5V Energizer® Ultimate Lithium batteries. When solely operating on continuous battery-backup power, its estimated battery life is up to one (1) day.

Power over Ethernet (PoE): compliant with IEEE 802.3af standard and compatible with 802.3at standard

Bluetooth® Wireless Communication Protocol

 

Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1

Bluetooth Range: up to 100 feet (30 meters)

IP Network Communication

 

Wi-Fi specifications

  • Wireless Networking Protocols: 802.11b, 11g, 11n single stream (2.4 GHz)

  • Wireless Security Protocols: WEP (Open & Shared), WPA (TKIP & AES), WPA2 (TKIP & AES)

  • Wireless Authentication Protocols: None, EAP-TLS, EAP-TTLS (MSCHAPv2), PEAP v0 (MSCHAPv2), PEAP v1 (GTC)

  • Network Communication Protocols: Hypertext Transfer Protocol Secure (HTTPS)/TLS 1.2

  • IP Addressing: Dynamic Host Configuration Protocol (DHCP), static IP addressing

  • Data Packet Size: typically less than 5 kilobytes (kB)

Power over Ethernet (PoE) and Ethernet specifications

  • Power over Ethernet (PoE): Compliant with IEEE 802.3af standard

  • Ethernet:10/100 Mbps

  • Network Communication Protocols: Hypertext Transfer Protocol Secure (HTTPS)/TLS

  • IP Addressing: Dynamic Host Configuration Protocol (DHCP), static IP addressing

  • Data Packet Size: typically less than 5 kilobytes (kB)

  • Connection to a switch port: spanning tree portfast (STP) must be enabled when a switch port is not connected to other routers or switches. Optionally STP can be turned off, which is not the same as disable.

Enclosure

Material: ABS plastic

Display: Liquid crystal display (LCD), dimension: 0.75" H x 1.38" W (1.90 cm x 3.50 cm)

LED Status Indicator: green, yellow, red

Dimension: 4.7" H x 3.7" W x 1.3" D (11.93 cm x 9.39 cm x 3.30 cm)

Weight: 0.3 lbs (136 gram) with 2 AA batteries

Mounting: wall or surface-mount

Operation

IP network connection: transmits Sync Bluetooth devices statuses to OneVue, downloads pending setting updates from OneVue, and connects to NTP Server to receive UTC time.

Sync Bluetooth mesh network connection: sends OneVue setting updates and received UTC time to Sync Bluetooth clocks/repeaters and receives statuses from devices.

Alerts: visual LED and LCD display indicators

Check-In Interval: system defined

 

During deployment mode, the first 8 hours after a Bridge is powered on, its operation is unique during this time period.

  • A Bridge automatically connects to the facility's network at the 15th and 45th minute of each hour. During each connection, it obtains UTC time from an NTP Server and checks-in to OneVue to download pending setting changes.

  • Sync Bluetooth mesh network automatically builds at the 20th and 50th minute of each hour. After each build, a Bridge automatically checks-in to OneVue to send received Sync Bluetooth device data.

Environment

For indoor use only and is not weather protected. Operating a device outdoors or in wet areas is an electrical hazard and may damage the device while nullifying its warranty.

Operating Temperature: 32° to 122° F (0 ° to 50 °C), indoor use only

Storage Temperature: -4° to 140° F (-20 ° to 60 °C)

Certifications

FCC, CE, and IC compliant

Bluetooth® SIG Certified. Reference Qualified Design 62891, 03 February 2017

All specifications are subject to change without notice.

Related articles