Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks.
When identifying the install location of a Bluetooth device, the following guidelines should be followed to ensure a device as adequate Bluetooth wireless signal strength.
You can also measure the Bluetooth signal strength at an install location to determine if the location has adequate signal strength.
A socket-outlet is required to be available within 18 inches (45.7 cm) from the clock installation location and should be easily accessible. Refer to the table below for power specifications.
Model |
Input Power |
Current Draw |
---|---|---|
AC-powered Single-sided |
120V~, 47-63Hz |
10mA@120V~ |
AC-powered clocks are supplied with a power cord with a two-prong plug. The two-prong plug may be removed for a hardwired (pigtail) installation. Hardwired installation requires a 120V~ power line in a junction box installed by a licensed electrician. Leave a minimum of 6 inches (15.2 cm) of cord inside the junction box.