Update the display of a digital clock or timer – Primex Support

You can set the display brightness level, display mode, and time and date format. For an elapsed timer, you can set its audio buzzer to be on or off.

Go to Devices > Clocks.

Tip

If you need to update more than one clock, be sure to use the multi-edit feature. From the list, select all of the clocks to update and then select Edit Selected.
From the list, select the Name link of the device. Its profile is displayed.
Select Show Advanced Options.

Update its display settings.

Setting	Definition
Brightness Level	The brightness percentage of its LED display. Options include 25%, 50%, 75%, 100%. A lower percentage results in a dimmer display. The default value is 75%.
Display Mode	Sets how the clock displays its time. Options include 12 Hour, 12 Hour w/ AM & PM, and 24 Hour. The default value is 12 Hour w/ AM & PM.
Display Format	Sets if the clock displays its time only or if it alternates between its time and the current date. Options include Time Only, Time & Date (Month - Day), Time & Date (Day - Month). By default, set to Time Only. If a time and date setting is selected, the clock display alternates between the time and date at the interval set (show time for) every 10 seconds. For example, if set to show for 8 seconds of 10 seconds; every 8 seconds the time is displayed and then the date is displayed for 2 seconds.
Show Time For	When its display format is set to a time and date format, sets the number of seconds time is displayed during the 10 second alternating cycle between the time and date. The default value is 8 seconds.
Buzzer On (elapsed timer model only)	Indicates if the timer audio buzzer is ON during a count down event. By default set to On.