The name of a clock, bridge or repeater commonly identifies its install location. It's recommended to develop a standard naming convention to allow devices to be located if maintenance should be required.
Go to Devices > Clocks.
From the list, select the Name link of the device. Its profile is displayed.
From the Name field, enter its name. Allows up to a maximum of 50 characters.
Select Save.
Note
Tip: If naming a Bluetooth Bridge, select Bridge instead of clocks in step 1 (above)
Primex Bluetooth products are shipped with a MAC address label that can be removed and placed on building plans or a list of building locations that can be added to OneVue at your convenience.
