A Bridge's battery level is transmitted to OneVue during each check-in. When its battery life is less than 25% remaining, the Bridge is set to an Alarm state with a Low Battery status. You may have noticed its yellow LED indicator flashing and the low battery indicator displayed on its LCD screen.
If you have already replaced its batteries, be sure to perform a manual check-in to clear its Warning state in OneVue, which will set the Bridge to a Normal state.
Remove its cover; simultaneously press the two tabs located on the top side of the Bridge (A)
Replace its batteries. Insert a 3.0v Primex Lithium/Iron Disulfide Battery Pack or two 1.5v Lithium AA batteries. Follow the symbols showing the correct way to position the positive (+) and negative (-) ends.
Verify the battery switch is set the up (on) position (B).
If also operating on AC power, verify the power adapter is plugged in. The green LED is illuminated when powered by AC power.
Press and release its check-in button (up arrow) to clear its Low Battery status and Warning state in OneVue.