The following step begins by selecting the Monitored Asset assigned to the sensor, which is the recommended method. This ensures the correct sensor monitoring the asset is selected.
Go to Monitoring > Monitored Assets.
From the list, select the Monitored Asset link. Its profile is displayed.
Select the Sensor Type link. The sensor profile is displayed.
Select the Gateway ID link of the sensor.
Select Show Advanced Options.
-
From the Unresponsive Timeout drop-down menu, select the maximum amount of time a gateway can go without a check-in to OneVue.
The Unresponsive Timeout frequency is required to be greater than the Check-in Interval setting.
-
Select Save.
The Update Pending status is set to Yes when a setting change is scheduled to be downloaded to the device during its next check-in to OneVue. Setting changes take effect when downloaded to the device. Once downloaded, its Updating Pending status is set to No.