Articles in this section

See more

Specifications: Wireless Tone Generator

  • Updated
Follow

Parameter

Description

Dimensions

7.25" L x 5.5"W x 1.25" D (18.41 cm x 13.97 cm x 3.18 cm)

Antenna

11.5 in. L (29 cm)

Power Supply

Input: 120 VAC, 60 Hz, 10 Watt

Output: 9 VDC, 1.65 AMP, 6 ft (1.83 m) cord

Switching Contacts

''Form D'' (one set each) normally open and normally closed

Switch Ratings

Contact Ratings:

  • 4.4 amp 1/6HP 125, 250AC

  • 4.4 amp. 20 VDC

C Break Ratings

  • 30 Watt maximum

  • 1 amp. 30 VDC; 24 amp. 125 VDC

Audio Output

Isolation transformer with center tap 600 mv/150 ohms output impedance

Variable output and line level

Identification (ID) Codes

25

Selectable Channels

US/CAN: 49

Plus Automatic Channel Search

Programmable Events

US/CAN: 96 (per ID) with 7 day selectable operations

Selectable Options For Each Event

Event Scheduler Pro software Settings

  • None

  • Tone on for 1 second

  • Tone on for 2 seconds

  • Tone on for 3 seconds

  • Tone on for 5 seconds

  • Tone on indefinitely

  • Tone off indefinitely

  • Tone on for 2 seconds, off for 1 second, on for 2 seconds, off

  • Tone on for 1 second, off for 1 second, repeated 5 times

Setting Defined Closure*

  • Switch defined closure 1 : 100 ms, 25 O ms, 400 ms, 8s delayed **, 14s delayed **, 10s, 7s

  • Switch defined closure 2 : 24 sec/hr, 24min 25 sec at 6am, pm, 100ms

* Switch defined closure events are used to accommodate Master Clock updates and with relay closures only. They are configured with dip switches inside the Wireless Tone Generator.

** These events occur at the end of the scheduled minute. It is also required that at least 1 minute is left between events using either of the delayed switch defined closure events.

Parts (Supplied)

  • Antenna

  • DB9 Computer Cable

  • Power Supply

  • Audio Patch Cable

  • 3-Spade Audio Patch Cable

  • Wireless Data Transceiver (optional)

  • Bell (optional)

Related articles