A PoE clock obtains UTC time from an NTP server during each check-in and then synchronizes to its assigned time zone. By default, all clocks are set to the NTP servers set in the account settings.
Note
If all clocks will use the same NTP servers, it's recommended to update the account NTP server settings. Go to Admin > select Edit your account name > update the Time Synchronization NTP Server settings.
-
Go to Devices > Clocks.
Tip
If you need to update more than one clock, be sure to use the multi-edit feature. From the list, select all of the clocks to update and then select Edit Selected.
From the list, select the Gateway ID link of the device. Its gateway profile is displayed.
Select Show Advanced Options.
-
From the NTP Servers (1-3), enter the domain name for each NTP server.
Select Save.
Its Update Pending status is set to Yes and the setting change is scheduled to be downloaded to the device during its next check-in to OneVue. Setting changes take effect when downloaded to the device. Once downloaded, its Updating Pending status is set to No.