Articles in this section

See more

Temperature Sensor specifications

  • Updated
Follow

OneVue Temperature Sensors use intelligent recording and alerts to continuously safeguard valuable medications, vaccines, and other temperature sensitive assets. These temperature sensors meet the strictest of CDC guidelines. The guidelines call for temperature monitoring data loggers with features that ensure patient safety, maintain compliance, and reduce liability while protecting vaccine efficacy and minimizing inventory losses.

Parameter

Specification

Power

AC power adapter: 5V DC USB Mini B (5 pin) connector interface, 5 ft (1.5 m) cable, Input: 100-240 VAC, 50/60 Hz, 0.4A, Output: 5V DC, 1.0A max

Battery Power: 2 AA Lithium 1.5V batteries; use of Energizer® L91 Ultimate Lithium batteries recommended.

Estimated Battery Life: up to 18 months with use of Lithium 1.5V batteries; estimation based on 1 hour Logging Interval, 8 hour Check-In Interval and adequate wireless signal.

Power over Ethernet (PoE) model: Compliant with IEEE 802.3af standard and compatible with 802.3at standard

Operation

Local Device Alerts: audio and visual status indicators

Audio Alert Reset Periods (user-defined): next alarm, 15 and 30 minutes, 1, 2, 3 and 4 hours

Alarm Delay (user-defined): 0 to 240 minutes

Logging Interval (user-defined): 15, 20, 30 minutes, 1, 2, 3, 4, 8, 12 hours

Check-In Interval (user-defined): 15, 20, 30 minutes, 1, 2, 3, 4, 8, 12 hours

Unresponsive Timeout (user-defined): none, 30 minutes, 1, 2, 3, 4, 6, 8, 12, 16 hours, 1 day

Internal Local Stored Reading Capacity: 4096 readings

Network Communication

 

Wi-Fi specifications

  • Wireless Networking Protocols: 802.11b, 11g, 11n single stream (2.4 GHz)

  • Wireless Security Protocols: WEP (Open & Shared), WPA (TKIP & AES), WPA2 (TKIP & AES)

  • Wireless Authentication Protocols: None, EAP-TLS, EAP-TTLS (MSCHAPv2), PEAP v0 (MSCHAPv2), PEAP v1 (GTC)

  • Network Communication Protocols: Hypertext Transfer Protocol Secure (HTTPS)/TLS 1.2

  • IP Addressing: Dynamic Host Configuration Protocol (DHCP), static IP addressing

  • Data Packet Size: typically less than 5 kilobytes (kB)

Power over Ethernet (PoE) and Ethernet specifications

  • Power over Ethernet (PoE): Compliant with IEEE 802.3af standard

  • Ethernet:10/100 Mbps

  • Network Communication Protocols: Hypertext Transfer Protocol Secure (HTTPS)/TLS

  • IP Addressing: Dynamic Host Configuration Protocol (DHCP), static IP addressing

  • Data Packet Size: typically less than 5 kilobytes (kB)

  • Connection to a switch port: spanning tree portfast (STP) must be enabled when a switch port is not connected to other routers or switches. Optionally STP can be turned off, which is not the same as disable.

Enclosure

Enclosure: ABS plastic

Dimension: 4.7" H x 3.7" W x 1.3" D (11.93cm x 9.39cm x 3.30cm)

Weight: 0.3 lb (136 gram) with 2 AA Lithium batteries

Display: Liquid crystal display (LCD), HTN reflective glass, dimension: 0.75" H x 1.38" W (1.90 cm x 3.50 cm)

LCD Display: current sampled reading, low and high sampled readings for the current collection period, and current operating state

LED Status Indicator

Mounting: wall or surface-mount

Environment

Operating Temperature: 32° to 122° F (0° to 50° C), indoor use only

Storage Temperature: -4° to 140° F (-20° to 60° C)

Certifications

FDA registered, 21 CFR Part 11 compliant

FCC, CE, and IC compliant

All specifications are subject to change without notice.

Related articles